Direct-to-Garment Printers Are Blurring the Lines Between Commercial and Industrial

• Originally of this 12 months, Brother launched its GTX600industrial direct-to-garment printer.
• Brother is a frontrunner in selling the “pod” idea, which mixes a number of DTG printers, automated pretreatment, and a
• Aeoon Applied sciences classifies its MAIKURO as an industrial DTG printer, however classification is considerably deceptive given the hourly manufacturing charge. At 65 darkish clothes per hour, the MAIKURO is absolutely extra of a high-end business or entry-level industrial printer.
• Whereas enhancements proceed throughout all DTG segments, current developments level to extra superior/sturdy business DTG printers and smaller but nonetheless highly effective industrial DTG printers.

By Johnny Shell

Introduction

Many attire decorators have seen the direct-to-garment (DTG) portion of their companies develop over the previous a number of years. Now, a few of these identical firms are confronted with the necessity to buy further printers to allow them to sustain with demand. Whereas those that personal business printers is perhaps pissed off with their slower than common print speeds, companies that personal industrial printers might complain a few lack of redundancy or manufacturing stops which might be attributable to machine points. Traditionally, DTG units have been divided into the next segments based mostly on their most print speeds.

Desk 1. Conventional DTG Segments

In the event you’ve been listening to a few of this 12 months’s new DTG printer launches, you might have observed that the normal hole between business and industrial printers seems to be closing. Right this moment’s DTG units are delivering sooner printing speeds, higher print accuracy, and extra superior applied sciences—all with a smaller footprint and a lower cost tag. These new units are blurring the strains between business and industrial printers.

New Introductions Are Closing the Hole

Brother

In January 2022, Brother Worldwide launched its GTX600 industrial direct-to-garment printer. This machine contains new options like a projector system that mechanically tasks the design to be printed onto its supposed place, which permits the person to see the design as it’ll seem on the garment earlier than printing to keep away from misprints. Brother’s Digital Line all-in-one pretreatment system will be paired with a number of GTX600 printers and conveyor dryers to maximise workflow effectivity. The system is on the market in two choices:

• A Synergy pre-treat unit consisting of a FireFly conveyor dryer manufactured by Brown Digital and a warmth press.
• The Schulze Pretreat Maker LINE machine, which might pretreat as much as 300 clothes per hour.

Each choices mix the processes of pretreatment, drying, and pre-pressing in a single machine. Utilizing three GTX600 printers, a digital line pretreatment system, and conveyor dryer, the system can produce as much as 182 clothes per hour. Brother is a frontrunner in selling the “pod” idea, which mixes a number of DTG printers, automated pretreatment, and a dryer.

Brother’s GTX600 Industrial DTG Printer

Aeoon Applied sciences

In April 2022, Aeoon Applied sciences launched its MAIKURO machine, which is a smaller two-platen DTG machine that may print as much as 65 clothes per hour. The printer makes use of eight Ricoh Gen5 printheads that jet photographs at 600 dpi with a most picture measurement of 40cm x 45cm (16-in. x 18-in.). The MAIKURO is a single gantry printer and, as this video reveals, every platen is first printed with the white underbase adopted by the colour move. Whereas the machine produces print speeds which might be slower than the opposite merchandise mentioned on this article, Aeoon classifies the MAIKURO as an industrial DTG printer. This classification is considerably deceptive given the hourly manufacturing charge—at 65 darkish clothes per hour, the MAIKURO is absolutely extra of a high-end business or entry-level industrial printer.

DTG Digital

DTG Digital (a subsidiary of Pigment, Inc.) spent the previous two years creating its new Q2 DTG printer. This machine is configured for hybrid functionality to print instantly onto a completed garment in addition to direct-to-film transfers on a single platform. The Q2 delivers industrial-level manufacturing speeds of 100 darkish and 150 mild clothes per hour and has a footprint of just one,006mm x 1,400mm x 1,931mm (42-in. x 55-in. x 76-in.). The printer additionally incorporates some sturdy options like a linear movement platen carriage information with auto top adjustment, two-stage ink mist extraction, and a staggered four-printhead array. A novel facet of the Q2 is the simultaneous printing of each platens.

Ser. Tec. SRL

Ser. Tec. SRL affords the Eagle TX S, which might print as much as 120 clothes per hour. This machine will be configured with two, three, or 4 printheads and options printhead place management that mechanically adjusts the printhead’s top based mostly on garment thickness to keep away from head strikes. The Eagle TX S may also print supplies as much as 15cm in thickness. A novel function of this printer is the a number of dual-platen configuration. As seen on this video, the round workflow permits for steady loading and printing concurrently.

The Backside Line

Whereas enhancements proceed throughout all segments of the DTG market, current developments level to extra superior/sturdy business DTG printers and smaller but highly effective industrial DTG printers. The strains between these segments are definitely blurring, so in the present day’s companies have a broader vary of choices than ever earlier than. The requirement for “excessive productiveness” now not means investing $250,000 or extra for an industrial-grade DTG printer. Utilizing the “pod” idea that firms like Brother are championing, a number of printers will be grouped collectively to supply volumes which have traditionally been related to higher-priced industrial DTG printers. Up to now, firms might need hesitated to speculate such a big sum of cash on a single printer that had the potential to close down for one purpose or one other. That is exactly what makes the pod idea so enticing.

Johnny Shell is the Director of Keypoint Intelligence’s Practical & Industrial Printing Consulting Service. He’s a printing professional and acknowledged chief with over 35 years of print trade expertise. Johnny is an Inductee of the Academy of Display screen and Digital Printing Applied sciences, a world physique of consultants which honors certified people by means of election to membership for his or her distinguished, long-term contributions to, and software and promotion of, display screen and digital printing and related imaging applied sciences for graphic, textile, industrial, and digital printing purposes.